Power Requirements |
|
Voltage Input: |
100-240V AC @ 2.0A 50-60Hz |
Stand-by Battery: |
Up to 2 x 12V DC 7.2Ah sealed rechargeable battery Panasonic LC-P12R2P or equivalent or 1 x 12V DC 18Ah sealed rechargeable batteryResettable fuse protected @ 6 Amps |
Voltage Output: |
13.8V DC @ 5 Amps (Primary supply source only) |
Battery Discharge Cycle: |
AC Off: Keypads indicate trouble condition, AV Fail report resent (if programmed)13.8V DC :Charging level11.5V DC: Low battery trouble at keypads, low battery report sent (if programmed)10.0V: DC Shut down and battery disconnected as voltage falls below 9V DC. |
Battery Recharge Cycle: |
AC On: Panel restarts, battery charging begins. AC trouble clears from keypads, AC restore report sent (if programmed).12.8V DC: Battery trouble clears from keypads, battery restore report sent (if programmed).13.8V DC: Battery float charged. |
Connections |
|
Connection (RS485 LAN): |
Max total LAN length using multi strand security cable = 300mMax total LAN length using 2 pair twisted shielded data cable (Belden 8723) = 1200m |
Environmental Considerations |
|
Temperature: |
0o to 55oC Operating |
Humidity: |
5% to 85% at 30oC non condensing |
Enclosure |
|
Dimensions: |
50(W) x 23(D) x 58(H)mm |
Warranty: |
3 years |
Reviews
There are no reviews yet.